Chapter 529 Wu Liangdong's Ambition (Part 1)
The ice stool is to torture the prisoner when interrogating. It is said that it appeared during the Han Dynasty, and Su Wu had suffered this punishment.
When a leech bath is to put a bunch of leech in the bath plate and then put the prisoner in, mainly to take advantage of people's fear. After all, a bunch of leech swimming around in the water is enough to make people feel scared.
It is said that Boss Dai had used these torture methods on Japanese female spies, and the effect was very good, so Lin Mo told Wu Wulin carefully.
Wu Wulin heard this and his eyes were shining brightly, and he hurriedly said, "Old Lin, I'll prepare immediately, hehe... I'll let these Japanese female spies taste it."
"Well..." Lin Mo nodded and said, "You go and try it! I just thought about it suddenly, and you have to try the effect first.
By the way, this method is enough to be used on the two Japanese female spies, the chief and deputy foreman of the front desk. Keep Lan Jinzhu for now and don’t move.”
"Old Lin, is it..." Wu Wulin looked at the insurance room when he heard Lin Mo's order.
Lin Mo looked around and found that it was Yang Haicheng who was looking at him and said, "Don't think about it. Haicheng was acting before, and the other party acted on the scene just now.
I think this woman may have had other thoughts, or she has not been completely brainwashed by the Japanese, and she is resisting the Japanese's arrangements for him.
You may not know that there was no use of her to divert the other person's attention at the beginning. It was this woman who took the initiative to seduce Haicheng, so we followed the trend.
She has already started to contact her target, but she has not taken that step for a long time. Now that she is making trouble again, isn't it strange?
So I suspect that this woman should be resistant to the arrangement of using herself to perform her beauty scheme. This can explain her behavior, and of course she is still guessing now.
As for the scene at the elevator entrance, it should have been tricked by Haicheng. If we take revenge, we will misunderstand it. Of course, we cannot rule out that we have other thoughts.
By the way, when you examine two other female spies, you can let her watch. When the time is almost over, I will talk to her and then decide whether to use torture in the future."
"Okay..." Wu Wulin nodded and left to make arrangements. Lin Mo was about to go back, but was blocked by Wu Liangdong again.
"Young Master, I heard that I have discovered a weapon warehouse. Can you take me to see it?"
When Lin Mo heard this, he laughed and stared at Wu Liangdong and said, "Old Wu, you won't go? Just tell me what you want!"
When Wu Liangdong heard this, his face turned red and said, "Young Master, I'll talk about this later! I'm still unresolved. I heard that you need me to do something, so you can tell me first!"
"Okay..." Lin Mo nodded, took several actions and told Wu Liangdong about the needs of some weapons.
"You can cut off the normal rifle for Carbines. You can start with the two parts of the barrel and stock.
The barrel does not need to be left for long. Our need is to have a distance of 200 to 300 meters, with good accuracy and power to facilitate the coping with some special situations.
The butt stock is cut off directly, replaced with a grip for grip, and designed an interface to install various butt stocks. You can look at the design of the others yourself."
Wu Liangdong nodded and smiled, "This is not difficult. You should be able to produce a sample gun in a few days. It takes ten days and half a month to test it, and you will be delivered to you at that time."
"Well..." Lin Mo nodded and asked again: "Old Wu, how is the repair shop in the recent situation? I have seen it in the training ground and have produced a lot of new things!"
Upon hearing this, Wu Liangdong smiled bitterly and said, "How to say it, it's mixed! After becoming a gun repair factory of the Intelligence Department, the factory can study guns openly, and everyone is full of energy.
Recently, there have been significant progress in all aspects. The gun design, technology, production and other aspects have not made low progress, which has made great progress from before.
There are too few orders. Apart from some of the silencers purchased by the office and the carbines, there are basically no orders, and I have been spending money in the near future."
Lin Mo heard this and comforted him: "You are in the early stage, which is normal. You have to be strong in your own way. As long as your skills are strong enough, you will change sooner or later.
Moreover, your eyes should not be limited to guns, accessories, etc. Most of these things are sold in one go, and consumables like bullets are a long-lasting good business.
And! The bullet pressing device and bullet reloader in your hands are also good, and there are many markets, so you can start with these first.”
"Okay..." Wu Liangdong thought about it carefully and nodded.
"By the way, I went to the training ground a few days ago. Master Liao said that you designed a carbin kit with a trumpet gun, which is very good. Can you introduce it?"
"Yes..." Wu Liangdong nodded, with a smile on his face, and said, "The Carbin kit that Chief Liao mentioned is a wreck gun that uses a twenty-round magazine to supply ammunition, which is commonly known as the fast and slow machine or twenty-stroke.
Because the sleeve is not loaded, it can be well integrated with the kit barrel when the extended barrel is not used. There is no sleeve, which also facilitates simplifying the kit structure.
The gun can be switched between fully automatic and semi-automatic, and the kit is equivalent to a submachine gun and a carbine. The magazine can also be replaced with the corresponding large-capacity magazine drum to increase firepower sustainability.
The Mauser pistol bullets used in the mausoleum gun have good power and ranges. A carbin kit is installed. Depending on the lengthened barrel, the effective range is about 100 to 200 meters.
By the way, Master, do you need me to send you some? The temporary replacement of the short rifle vacancy is not up to par, but it should be barely available."
"Yes..." Lin Mo nodded and continued: "Send some to the training ground and mine, and I will give you more to see if it can be delivered to my brother. He may need it.
By the way, I don’t have a gun here, you have to provide it with me with the gun, this should be OK, right?"
"This..." Wu Liangdong smiled awkwardly and explained: "Young Master, I only have a dozen of these guns in my hand, but I still pestered the people in the area and plundered them from the confiscation warehouse."
This chapter is not over, please click on the next page to continue reading! "Uh..." Lin Mo gave Wu Liangdong a speechless look and said, "Leave a few for you to continue researching. All the others are sent to me. Get more kits and I can see if I can find a gun."
"Yes..." Wu Liangdong nodded quickly.
"By the way, I heard that many of the guns you did research were provided by pestering people from the local area. Didn't you make things difficult for you?"
"No..." Wu Liangdong shook his head and said, "Often, I also provide them with some gadgets, customize some cold weapons like daggers, and help adjust guns, so the relationship is pretty good."
"That's good..." Lin Mo felt relieved when he heard Wu Liangdong say this and continued: "I have seen a lot of things you made of plastic in the training ground, but they just looked very rough. Have you encountered any trouble?"
"No, no..." Wu Liangdong shook his head vigorously and explained: "Young master, those are the initial test items. We have made a lot of progress recently and have basically mastered the relevant technologies.
The raw materials purchased are basically consumed in practice. The next batch of raw materials is still on the way, and it will take a while to arrive. Then we will get a member of the team and let the young master take a look."
"Hmm..." Lin Mo nodded and continued to ask: "Lao Wu, what is the prospect of plastic in guns? What is the performance?"
"How to say..." Wu Liangdong pondered for a moment and said, "The strength is OK, the heat resistance is very insufficient. If it is used on the sleeve and shoot twenty or thirty shots in a row, it will basically be useless, and some small parts will not be used.
However, it is enough to use a pistol on the grip or the lower part of the gun. The guardrail stock on the rifle can also be used. The production kit is also very effective and can greatly reduce weight. This is a bit expensive."
"It is normal to be more expensive. After all, the industry and technology are not mature, the cost is high, and the output is limited. The early price is definitely not low, but the price will drop in the future. Don't let this limit you.
As you said, plastics are now strong enough and not heat resistant. According to this, those that can be used on them, such as magazines, drums, gun holsters, magazine hoods, pressers, reinstallation machines, etc., should not be limited to guns."
"I understand..." Wu Liangdong took a small notebook and wrote down all Lin Mo's suggestions and needs.
Seeing this scene, Lin Mo asked, "Old Wu, I heard that the repair shop can already make a gun barrel? What is missing is better equipment?"
"Well... I can't say that, the craftsmanship of technicians and masters has indeed improved a lot, but they cannot rely entirely on machines. There are still many shortcomings in technology.
As for the pistol barrel alone, those with high technical requirements can only shoot 180 shots, and those with lower requirements can fire about a few hundred shots normally, which is not enough to use.
Of course, this is rifling. If a smoothbore gun like a shotgun, its service life may not be as long as that of a genuine foreign gun, but it is enough."
Speaking of this, Wu Liangdong stopped his work and smiled and said, "Young Master, I have discovered a new purpose of extending the rifled barrel, which is to change the traces left by the bullet's rifling line. Do you need to give you some?"
"Oh..." Lin Mo was intrigued and said with a smile: "There is such an unexpected joy? I think about it! Well... I may not use too much here, so I will send it to the training ground! I will tell you if I need it."
"Okay..." Wu Liangdong nodded and asked, "Young Master, I gave me a secret order yesterday to study and produce several police equipment. Can you help me find out the details?"
Lin Mo heard this and said, "I know this is to enhance the police's law enforcement capabilities and reduce the police's military capabilities. The department is preparing to give the police a suggestion to change their clothes.
There are other considerations here. You don’t have to worry about this, just do it according to the instructions in the department. There will be orders for you at that time. Are there any problems?"
"Well..." Wu Liangdong pondered for a while and said, "The police equipment explained in the department is a revolver and a shotgun. With our skills at this time, it is not difficult to get a suitable one.
There are some problems with production. After all, there are limited people in the factory, so the amount of police changing clothes must be very huge. We may not even be able to supply a small amount."
Lin Mo heard this and said, "Your primary task is not production, but designing corresponding police equipment. You don't have to start from scratch, just copy and make some modifications.
As for output, you can think of some methods from standardization and set standard parameters for various parts. At that time, outsourcing some simple and unimportant parts, and producing the heaviest parts and finally assemble them, which should solve many problems."
“Standardization? Is this possible?”
Faced with Wu Liangdong's questions, Lin Mo explained: "The repair shop belongs to the intelligence department. It cannot be too large in scale. You can produce it throughout the whole process. This is unpaid and will occupy a lot of places.
If you want to develop, your focus should be on weapon research and development. As for production, just keep the production of important parts, and try to outsource the others as much as possible.
As for whether it is feasible, this is certain. The requirements for some parts are not that high. As long as acceptance standards are formulated and strictly enforced, the prices are also fair. The outside factory will do it for you.
Besides, the public goods you are looking for may not be outsiders! The Lin family is also moving towards the industry and can be supplied here.
Of course, the parts should only be made into semi-finished products for you, and you will need to process them simply before you can use them. As for the price, it will be very discounted here."
After hearing this, Wu Liangdong felt relieved and continued, "Young Master, please give me some advice on the design! I'm afraid I can't grasp it."
"Okay..." Lin Mo nodded and nodded, "I can give some advice this time, but you still have to strengthen it in the future and grow as soon as possible."
"I understand..." Wu Liangdong nodded.
"Well..." Lin Mo pondered for a while and said, "For the purpose, the purpose of police equipment is to subdue the criminals, as long as it is powerful enough.
For revolver, you can start with bullets, choose a model that is powerful and has a lot of domestic equipment, otherwise it may not be used after reporting. The nine-mm bullet from the machine should be quite suitable, you can pay attention.
As for shotguns, the barrel is shortened and the butt stock is sometimes used to telescopic or fold, which is both light and reduces the range power. You can try the bullet case, can you replace part of it with plastic?
There are two versions of guns, one is to use a lot of plastic parts, and the other is to use the current common materials, so that you can try both hands and water.”
Lin Mo said, Wu Liangdong was recording while he stopped writing. Lin Mo asked, "Old Wu, the training ground should have already told you about the subsonic sniper bomb. Have you arranged it?"
"The arrangement has been made, and the preparations have begun. You can start research in the next few days. You should be able to have the first generation of products in less than a long time."
"Okay, then I won't ask more..." Lin Mo nodded and continued: "I have a new demand for today's action.
It is when arresting, once the number of people is at a disadvantage, it is difficult to catch live. You need to develop a bullet that is not fatal but can also cause most of the ability to resist."
"Not fatal bullet?..." Wu Liangdong fell into deep thought and said, "Reduce charge? This is not possible. The metal warhead is very harmful and the warhead must be replaced.
Chapter completed!