Seeing the concerns in the minds of several people, Lin Mo still explained it carefully and took a lot of time to reach a consensus.

However, in addition to shooting range testing, it also has to be tested on the training ground for a period of time. Only after passing the performance will it be adopted depending on the situation. Lin Mo naturally has no objection to this. He said that passing the test does not mean cooperation. He did not dare to adopt it rashly without a trial test.

When I opened a new box, it still had the same recipe and the same taste. Ten guns and a large amount of ammunition, with oil paper envelopes on it additional instructions, but the gun is a revolver, so it is probably a revolver!

This is a revolver that can shoot shots. The nest is long and uses a .410-caliber slender shotgun. Of course, this diameter is not much different from the .45, so it can also use .45 pistol bullets.

There are two types of .45 pistol bullets prepared in the box, one is a flange pistol bullet, which can also be called a revolver special bullet, and the other is a .45 ACP bullet, which is the M1911 bullet, which is used after a half-month clip.

"It's interesting! There's more than one new weapon!" After reading the accompanying instructions, Wang Mingkun couldn't help but sigh.

Lin Mo shook his head and said, "This gun is not of the same nature as before, it is a new gun, but it only has increased the bullet nest. Other parts have been copied through the original structure design and have basically not changed.

Although the previous one has copied a lot of things, it has made many new design adjustments based on usage needs, theories, new materials, etc., and has devoted some effort, so it is considered to be a new gun designed independently.

Of course, the revolver has a mature and reliable design. Many of the revolver abroad are similar, but the design improvements guided by the front gun based on the use needs and theory, this gun is still almost the same."

"…Well..." After saying this, Wang Mingkun understood, looked and played with it, and asked Wang Shoufei: "What do you say? Is this gun worth distributing equipment?"

Wang Shoufei grew up holding a gun, and he was a gun-loving man. He had the opportunity to play all kinds of guns in the training ground and could be considered half an expert in the use and understanding of gun weapons.

Wang Shoufei picked up the inspection and opened it a few more times, saying: "The attack transmissions are all mature and reliable, and there should be no malfunctions. The growth of the bullet nest and the shotgun, which requires greater force when striking and turning the revolver.

Overall, it is a bit useless. The advantage of this gun is that it can fire shotguns, but I have tested this bullet and its power is relatively small. It is still on the long-barrel gun. The revolver barrel itself is shorter, and it is still a structure with a poorer seal, which is a structure with a poorer seal, and the power will be lower.

Our main purpose of this type of short and portable shotgun is to break the door. With this power and quality, there may not be many problems. A better one is probably going to cost two or three shots, and a better one is going to have to shoot bullets. No matter how good the power of other bullets is, it is probably not very useful at most.

As for other types of bullets, we probably won't use them. Of course, there are advantages. Compared with the truncated shotgun, this is a specially designed gun after all, with stability, safety, handling and amount of ammunition to be used, and it is definitely not worse than just using it."

"...Awesome..." Lin Mo couldn't help but give a thumbs up after hearing this. It took only how long it took to play the gun clearly and analyze it in a very clear way. That was really indispensable to both ability and hard work.

Several people whispered to each other, and Liao Tinghui interrupted and added: "This gun can still be distributed or optional as a backup weapon. The most important thing is that in addition to these just now, it also has almost all the advantages of a revolver.

Problems such as stinky bombs and shells have little impact on use. If you appear, you can easily fire the remaining bullets in the bullet nest. In assassination and attack tasks, you can have a higher tolerance rate to avoid failure due to a small failure.

The rotor mechanism relies on the pulling of the hammer and the rotor to drive the hammer and the rotor. There is no need to load it. Pulling the pulling of the pulling requires considerable force and will not cause fire easily. This gun requires greater force and higher safety. You can completely avoid safety and let the gun be fired by just digging the gun.

This is a great advantage. In case of emergency, especially when a close-range sudden attack, you can counterattack yourself in the shortest time. Although the revolver reduces the power of the bullet, it does not have much impact at close range. Moreover, the powerful ammunition is used, especially the small shotgun, which is also compared to other shotguns. If you hit the opponent at close range, you can basically calm down the situation."

After analyzing and interpretation, several people nodded, but Liao Tinghui attributed the credit to Lin Mo's previous statements, which led to several people's politeness.

However, when Lin Mo opened several boxes of magazines and drums one after another, the few people couldn't sit still. They were ready to go, and they could no longer care about any politeness.

Because most of the magazine drums in the box are matched with lasso, since they were tried and returned to continue to be modified and optimized. Everyone was thinking about it and was eager to see it, thinking about when it could be done.

Judging from the number of magazine drums distributed in the box, it is obvious that all guns have been optimized and modified and sent to the official distribution. This is the most convenient weapon they use. How can we not be in a hurry?

Seeing that several people were so anxious that they scratched their heads, Lin Mo planned to be slow and slow to swell their appetite. In the end, Liao Tinghui pushed and urged them several times. Wang Mingkun and the other two were also staring at him with resentment, which made him feel heartbroken.

Another box of muzzle accessories and a box of buttstock accessories were opened, and Lin Mo finally got there...

"…Uh…" He was pushed away, and before he could take a look! He was squeezed aside and looked up again. The three of them were already in the hands of the treasure and exclaimed.

The shiny black metal gun body, the pistol grip with complex patterns, the triangular telescopic adjustment and replaceable stock, the straight and full-through upper rail, the tactical front guard of the heat dissipation hole guide, the shape is thick and short, and the exclusive suppressor that aligns with the front guard on the upper side...

In addition to its smaller size, magazines, and some old weapon design styles left behind, others already have the flavor of various tactical weapons in later generations, but they are still unique and novel in this era.

The butt stock, grip, front guard, and other modification parts that require a certain amount of bearing capacity are also made of synthetic resin steel-encapsulated materials. The steel is stress-encapsulated, while the synthetic resin is convenient for processing these complex structural patterns.

For example, the front guards have holes in the metal and the bumps on the processing guide rails. With the current technology and technology, it is estimated that if you work hard for ten days and half a month, you may not be able to make several of them.

Although the synthetic resin is processed without forming all the holes and convex structures in one go, it is much easier to process the general shape and then drill, cutting, trimming, grinding and other processes than to process metals. Calculate the working hours, it only takes one or two days for a worker.

Other components are similar. Even because there is no complex requirements for thickness and structure of the front guard, it can basically be formed in one go, and then slightly trimmed, polished, and then processed after passing the inspection.

Magazine drums are also used for metal on the head, and synthetic resin is used elsewhere. Since it is used, strength should be fine, but it is not known how durable it is. However, as long as it is not too slow, it will be broken. Anyway, it is not unacceptable to keep the repair shop and replace the performance with some cost.

Seeing the few people put the gun on their backs directly, many of the team members who were receiving the things next to them seemed to be hooked, staring at them without blinking, Lin Mo was speechless, as for? He also took the gun belt and put it on his back ←_←

Unboxing again, a box of strange accessories was opened, some of which looked like buttstocks, but only a small part against the shoulders, as well as wire ropes, and accessories with grips and tamps. However, the grips and tamps of the gun were obviously not removed, which made several people confused.

"Didn't you feedback before? Is this gun a bit long? In a narrow environment in the alley room, it is not easy to use. This is a set of components to solve the problem.

Remove the long butt stock from the butt connector, replace the short bracket, install the grip and strike assembly on the front guard rail, and then use a component to hold the gun and strike the guardrail, and then connect it to the strike with a wire rope.

In this way, a rifle is obtained, which reduces part of the length and is more flexible in a narrow environment. However, there are also disadvantages: the feel and bullets will change in all aspects, and even the techniques and tactics must be adapted. A more reasonable plan is for some people to adjust during the action."

That being said, but several people were in a bad mood, especially Wang Mingkun, who had used this gun in actual combat before and knew the value of this set of components.

Lin Mo didn't say much, and continued to unbox the box. Most of the accessories such as the muzzle were opened. There were new models that were confirmed to be shipped, and some were newly launched to test. There were also many new design kits, but the details were basically improved and optimized based on the original.

However, there are also guns. Lin Mo drove a box of machines. The model of the gun was FN's M1930 Bronning Light Machine Gun. The repair shop modified the muzzle position for this side and included various adapted muzzle departments.

"I remember you seemed to have feedback before, the unreliable performance of the ZH-29 semi-automatic rifle on the battlefield?"

"…Yes…" Xu Zhiyu nodded, with a little bad face and said, "My team encountered this in the previous battle. Afterwards, he came back to test it and found that the gun was in a dirty environment, which was very unreliable. He even failed to fiddle for a long time without firing.

What’s even more troublesome is that after asking the repair shop, it was said that it was a defect in the gun design and could not be improved and optimized through modifications. This is also the reason why we have been ruthless in the gun test recently. I am really worried that we will encounter it again. At least we should know what the situation will have problems in the gun and try to avoid it."

"…I understand..." Lin Mo nodded and said, "Have you ever considered modifying this gun? Shorten the barrel and modify it with Somi. You should get a heavy rifle that can be optionally equipped.

Of course, I am not talking about this type, but the original American gun. The gun has a fast and slow machine, and it is more controllable as a rifle. At the same time, it uses light barrels, which is not like this type that has undergone a light machine gun modification."

"The American gun should use American ammunition? At present, we have basically used German ammunition in a unified manner. Is it a problem to use general ammunition?"

Wang Mingkun raised a doubt. The previous Springfield sniper rifles had been abandoned by them and replaced with the Mauser rifle modified. Now they have to change them back?

"There is no way to do this! If you don't have independent design production capacity and want weapons with excellent performance, you can only make some choices. Besides, the pistol does not have many ammunitions with multiple caliber, and even the same gun will have many ammunition types due to various needs.

What's more, you are not many people and have a place to repair the machinery. Don't worry about not being able to supply all kinds of ammunition. As for performing some special tasks, you can prepare in advance or choose weapons depending on the situation! Your choices are still very rich, and there are not too many troubles of conventional troops."
Chapter completed!