The bright silver liquid gradually filled the entire storage sterile. I first put the dragon claws and the carved keel bones into the mold, then clamped them tightly, and carefully injected the ore melt along the grooves at one end. After the melt completely entered the mold, I clamped the dragon claws and shook them gently for a few times so that the melt could fill every gap in the bones and become semi-solidified, and then poured on coolant.

Chi chi, the cold frost quickly evaporated on the keel bone and rose into white mist. My heart suddenly rose to my throat. If it broke when the fusion and connection were broken, it would not be changed. The fog gradually dissipated, and seeing the dragon claws and bones tightly connected, my heart was then relieved. Since the roughness was completed, I had to continue the next step of fine processing.

The front end of the golden-red bone stem is carved to resemble a dragon head. The open dragon mouth slightly bites the dragon claws, and two arc-shaped dragon horns appear in the bone body, which is the place used to connect the dragon tendons.

The excess ore melting night actually spread around the hollow bone slit inside the dragon claw, filling it with its interior. The cold metallic luster appeared faintly on the surface, and the entire dragon claw seemed to be bathed in the flames of hell, which was very strange and stylish, which was completely beyond my expectations.

He held the forged dragon claws in his hand and waved them a few times. He nodded with satisfaction. The next thing he did was to connect the dragon tendons.

Take out the dragon tendon from the bag, and after polishing it smoothly, I tied it into a ring on the dragon horn, walked it around twice, and tied a concentric knot. I tried the toughness, and it was indeed good.

However, should we make it more firmer? We always feel that this dragon tendon is a bit unsafe. We glanced at the steel claws on it and I noticed that the chain on it was obviously carefully forged. It is linked together and easy to break.

With that, I might as well tie a dragon tendon. The two dragon tendons together should not break anyway. According to the same method, I tied the other dragon tendon to the dragon horn ring and weaved the two dragon tendons into a thick one. In this way, the dragon rope became stronger, okay, just do it. I took out all the dragon tendons that were formed in the sky, and weaved it, and the longer the rope, the better.

Finally, I used up all the dragon tendons in my hand. I looked up and saw that I was so busy. I didn’t pay attention to it. Now it was like this... How could I have such a long rope flying claws? I saw that the whole rope was 40 meters long. Forget it, it was already very troublesome to weave it. Could it be that I could not untie it anymore? Just use it longer. I will never suffer any loss.

I picked up the dragon tendon rope and danced, and brought the dragon claws up. Yes, it was not very elastic in the hand, and it was not like the flying claws I had used before. Once the distance was farther, I felt stiff. The knitted dragon tendons were like rubber bands. After throwing out the dragon claws, if they didn't catch anything, they would immediately rebound, instead of falling on the spot.

Putting the dragon claw aside, I picked up two more keels. What's the matter? We have to add a ring buckle to the tail of the dragon tendon. After a while of polishing and forging, the two golden hook-shaped ring buckles were also formed. I was connected to the tail end of the dragon tendon rope. It was like a curved dragon tail, which could be held in the hand or hung on the waist. In this way, even if we hang ourselves in the air with flying claws in the future, we can still attack with both hands. Hehe, I seem to have seen the infinite usefulness of this keel flying claw.

"You have made a new product, please name it." Listening to the system's crisp reminder, I was filled with joy. We have a good character and the success rate is indeed high. What's the name? Well, I thought for a moment, so don't be too complicated, just call it Feilong Cloud Claw.

However, in theory, equipment made with such top-quality materials should be of the best quality, but the flying dragon cloud-detecting claws are nothing special. At most, there are only a few more attacks than ordinary flying claws. This inevitably disappoints me. Could it be that something went wrong during the forging?

After all my thoughts, I learned to give up. Anyway, this elastic dragon cloud-exploring claw should be able to help me a lot. Just as I was about to put it away, a tall and thin apprentice came over and said to me, "Master Yin, why is it rare to see you inlaid gems on your weapon? Is it because you can't find a suitable gem, or is it too taboo to have a low success rate?"

"Inlay gems, right!" I slapped my thighs suddenly. Why didn't we think of it before? Didn't there be any gems inlaid? We used gems when we were forging a wand for a ponytail, because the wand itself needed to use gems of various attributes to gather magic power, and when I created other weapons, I didn't realize this at all. In fact, the reason why monsters fell on the ground weapons or equipment had special bead attributes was that they were more or less inlaid with gems of various attributes. In this way, should our flying dragon cloud claw have two gems inlaid with their faces? I thought to myself.

Turning my backpack upside down, I found a few gems that could be used as inlays, and excitedly headed to the flying dragon's cloud claws to inlay, but when I was about to take action, I suddenly stopped again.

When I was forging a wand for the ponytail, I had planned the location of the gem from the beginning, so it was successful at one time. But now I have to add gems to weapons that are already finished. Will the result be the same? Moreover, if the inlay stone is used, if it fails, there will be nothing left.

Well, for safety reasons, I decided to try a little weapon first. Which one should I take? I don’t have any other extra weapons and equipment to try. After thinking about it, my eyes fell on the full moon scimitar. This knife has been with me for a long time, and it is time to improve its quality.

Although it is feasible to inlay the gems on the blade, it is probably not small. I took out the scimitar and looked at it carefully. It seemed that I could only make a fuss on the handle of the blade, but how can I add it intact?

I turned around and pulled the thin and tall blacksmith apprentice and asked casually: "Have you ever inlaid gems with equipment?"

He nodded and said, "Of course there is, Boss Qian often comes to use equipment to add gems."

"Oh," I was immediately happy when I heard this and asked quickly, "What do you do usually?"

The blacksmith apprentice looked at me with some difficulty, as if thinking that our "master"-level blacksmith also asked such low-level questions, but he still replied respectfully: "We all first choose the inlay part, then drill holes, then add ore melt, and finally put the gems in and cool it, and that's it."

Oh, so that's it, so "simple"... I let go of the apprentice and immediately started to think about it. After thinking for a while, I picked up the full moon scimitar, put it on the furnace for a while, then put it on the anvil, lifted up the diamond chisel and was in the middle of the handle of the knife, and chimed in a small hole, which was slightly larger than the gem I chose. Then I melted a piece of chicken blood ore and Chixia Long concentrate, scooped a spoonful of mixed solution, poured it into the small hole, and waited for a while to cool down. When the ore liquid was viscous, I immediately picked up a ruby ​​inlaid and stuffed it in.

The extra attribute of this ruby ​​can add fire attribute attacks to the attack. If you succeed, will you get a flame knife for us? When I was full of imagination, I heard a crisp sound like a shattering glass. The ruby ​​cracked in the concave hole, and the handle of the full moon scimitar was unexpectedly interrupted in two pieces.

Why, why is this happening? I picked up the broken handle with a depressed face, which was considered scrapped. I thought to myself with depression: How could this scimitar be so fragile? It was broken like this.

"Fuck, it seems that I'm not suitable for inlaying, I'll hit the ghost when I open the door." I threw the hilt aside and said angrily.

"Young man, if you don't experience the wind and rain, don't give up criticizing anything, don't give up criticizing anything easily." A thick voice came from outside the door, as if familiar. I looked up at the door: the long silver hair like a halberd, the steel-like body, and the flames in the furnace outlined a golden red shadow around his body. Isn't this Master Xinzi? How could he appear here?

Later I learned that as the highest NPC craftsman in various auxiliary professions, I would visit my own fields every month and give some guidance to raise better industry talents. Especially in workshops that produce high-end items, there is a certain chance of ushering in the personal guidance of the NPC craftsman. The players and NPC workers present can improve their skills. After I made the Agile Sword and Blue Wing Battle Bow in this place, I can be regarded as a way to get the NPC blacksmith here, so the old man came here when he heard the news. Originally, the time he came was not fixed, but I didn't expect that he happened to be met by me. It was really destined and I was lucky.

"Mr. Worker? Why are you... you always here?" I quickly stood up and hid the remaining full moon scimitar behind me. I saw our failure and wouldn't I laughed at him to death.
Chapter completed!