The fourth-generation AKM anti-monster missile is equipped with a total of 36 shells.

In other words, all missile launchers can fire at the same time and six attacks can be launched.

Compared with the previous [Chixiao], which had only eight heavy artillery shells, 36 shells are simply crazy. Even the Eureka Raider, which had the most shells in the past, had only 12 anti-monster missiles.

Of course, with more quantities, the cost will be higher. The cost of SLR monster missile weapon system alone will exceed 800 million soft sister coins.

In addition to the anti-monster missile on the abdomen, Lin Feng was not ready to change the plasma cannon in the palm of his hand.

As it turns out, plasma cannon is one of the best weapons to deal with monsters, and Lin Feng has no choice for the time being.

Two palms, two plasma cannon muzzles, full of firepower.

As for the original laser eye on [Chixiao], Lin Feng plans to completely modify it into a laser scanning eye.

He simply wanted to use lasers to kill monsters. With the current technological level, Lin Feng used lasers to destroy monsters' softer organs, such as eyes, but when he was in a real battle, he found that this operation was not realistic.

For example, the virus in the Battle of Luoshanji can survive even if the head is cut. What's the use of blinding your eyes?

So this time, Lin Feng designed the head of the mecha as a big one-eye, and all the laser weapons were modified to laser scanning. Like the original right-eye laser of [Chixiao], it has a biometric function and can transmit the monster's bone images to the display screen before the cockpit is controlled, so that the driver can accurately strike the monster.

Simply put, the mecha weapon system designed by Lin Feng this time is to simplify the complex, and the essence is not expensive.

It is not like the [Tiger Guard], which has many thermal weapons, but the power of thermal weapons is greatly reduced. In the battle of Luoshanji, eight guns were fired at the same time, and the virus's body was penetrated.

In view of this, in Lin Feng's design, every thermal weapon must be the most powerful weapon in the world at present, and not make those fancy things.

Not to mention that one shot can penetrate monsters, it can at least ensure that three shots and four shots can be used to hit monsters in the opposite direction.

But in the entire mecha design, what Lin Feng pays most attention to is not the mecha power system, operating system or weapon system, but the design of the mecha legs.

At the beginning, the reason why Lin Feng was interested in Zhang Xiaojiang's mecha model was because he installed springs on the mecha legs.

With the spring, the mecha's bounce ability can be greatly increased, allowing Lin Feng to use the leg attack movements when fighting.

But a simple spring is not enough, so Lin Feng must print something new.

That is the hydraulic system.

The function of the hydraulic system is to increase the force by changing the pressure. A complete hydraulic system consists of five parts, namely the power element, the actuator element, the control element, the auxiliary element (attachment) and the hydraulic oil.

Hydraulic systems can be divided into two categories: hydraulic transmission system and hydraulic control system. Hydraulic transmission system mainly functions to transmit power and motion. Hydraulic control system must make the output of hydraulic system meet specific performance requirements (especially dynamic performance). The commonly referred to as hydraulic system mainly refers to hydraulic transmission system.

What Lin Feng needs is also a hydraulic transmission system.

Hydraulic transmission system has similar functions as springs, but its performance is stable than that of springs.

In hydraulic transmission systems, the most important part is actuators (such as hydraulic cylinders and hydraulic motors).

The function of the actuator is to convert the pressure energy of the liquid into mechanical energy and drive the load to perform linear reciprocating or slewing motion.

Actuators are the main part of the hydraulic transmission system and the most difficult part.

Because it needs to carry a weight of several thousand tons of mecha, the quality of the actuator is quite high.

There are many advantages of hydraulic transmission systems, such as small size and light weight, high stiffness, high accuracy, fast response, etc.

However, its disadvantages are also quite obvious. For example, it is sensitive to temperature changes, has hidden dangers of leakage, is difficult to manufacture, high cost, etc.

If you want to carry a weight of thousands of tons of mecha, you must design more than ten hydraulic transmission devices on the soles of the mecha. Moreover, for the actuators in the hydraulic transmission device, the most advanced materials must be used, otherwise the cylinder may explode.

Lin Feng can only place this kind of material on the yttrium ore on Skull Island.

Simply put, the hydraulic transmission system is used to replace the function of the spring and is equipped with a device that adds a bounce function to the legs of the mecha.

Among the current mechas, hydraulic transmission systems are used in many places, but no one is currently considering applying hydraulic transmission systems to the legs of the mechas.

In other words, the attack method of mecha legs depends on the coordination of mecha drivers and is the blind spot of the entire mecha industry at present.

Only Lin Feng would notice this. After all, his nerve strength value is too high, so there is no need for so-called coordination to drive a mecha.

Because after several months of precipitation, Lin Feng already had the design direction of a new mecha in his mind, so the design of a new mecha was not difficult for him at all.

In just one day, Lin Feng has completed the concept map of the new mecha.

He is 112 meters tall and weighs about 7,800 tons. Looking at the concept picture, he looks like a strong man with a strong figure. He can also feel like a cyclops because of his large one-eyed design.

Compared with the agile route Lin Feng took before, this mecha has the characteristics of a defensive mecha, and the protection thickness of the main parts of the mecha is 120cm-360cm.

That is 1.2 meters to 3.6 meters, which is comparable to the Beihai branch mecha.

This defense thickness is something that I couldn't imagine in the past [Chixiao], but Lin Feng could not have designed it like this when he designed [Chixiao] because he didn't have that much money to get such thick armor at that time.

Although the armor is very thick and will obviously slow down the speed of the mecha, Lin Feng had to abandon the setting of the speed mecha, because the wings on the back of the mecha were destined to be impossible for this new mecha to take an agile route.

The martial arts in the world are invincible, but only fast is not broken.

It is impossible to fail to break fast, Lin Feng can only rely on invincibility.

It’s just a pity that this concept picture is not complete, because it lacks the design of back wings, which makes people feel that the new mecha is always disadvantageous.

Lin Feng had made up his mind and went to the aircraft manufacturing company to study after returning to his company and explaining the matter about the new mecha.

I believe that with the manufacturing experience of [Chixiao], the company's technical supervisors can complete the manufacturing of core parts of the mecha according to their own design requirements.

After completing the concept of mecha design, Lin Feng turned off the computer, walked out of his room, came to the deck, and had afternoon tea with Cai Tiantong and others.
Chapter completed!