.

The gap is not big, but sometimes this gap lasts several years or even decades to catch up. Duan Guoxue spent nearly thirty years in the mountains to build his own various systems, and had shown the various benefits brought to him by technology more than ten years ago.

The most intuitive thing at that time was that it could bully domestic warlords militarily, while people's livelihood was the food and clothing brought to everyone by new rice seeds. Although many years of construction could not bring prosperity to all the people in the four southwestern provinces where Duan Guoxue started, the people in the four southwestern provinces now sincerely support Duan Guoxue and his government.

Duan Guoxue does not spare any effort to form and improve his scientific and technological system. Many talents, funds, and equipment are given priority to allocating them to scientific and technological research institutions and production units. The only purpose of doing this is to enable his scientific and technological technology to be digested and transformed into practical products as soon as possible. The profits generated by sales of these products in Europe and the United States are fed back into various constructions that lack funds.

After more than 20 years of catching up and catching up, in China, the southwestern provinces are now the largest industrial base in China and the focus of high-tech research and development and production. This place not only produces various high-tech products, but also produces high-precision machine tools and various production machines with better processing performance.

Take high-precision machine tools for example. The machine tools produced by Liuzhou No. 1 Machine Tool Factory have exceeded the machine tools produced by the most rigorous and demanding Germans, and are stronger than those of Germany in terms of processing accuracy and use reliability. Such achievements are not only helped by Duan Guoxue and synthetic machines, but more are the results of Chinese workers' hard work and stricter work style.

The production of precision machine tools is not so easy. If any part on the machine tool is not fine enough, it will bring unpredictable slight vibrations or deviations to the machine tool. In precision machine tools, the machining accuracy of one to nine after a few zeros is paid, any slight vibrations and deviations will make these zeros less than one or two.

To achieve this, a machine tool must have excellent precision. The production of such parts requires not only good equipment but also excellent technicians to control them.

In later generations, high-level machine tools are usually produced by senior technicians in small quantities and assembled into more precise machines to reprocess more precise parts, so that they can improve the machine's machining accuracy step by step. However, this machining accuracy will become very difficult to climb to more precise processing after reaching a certain level. From a millimeter machining accuracy of one millimeter to a millimeter machining accuracy of one millimeter machining accuracy of one millimeter machining accuracy of one millimeter machining accuracy of one millimeter machining accuracy of one millimeter machining accuracy of one millimeter machining accuracy of one millimeter machining in the later generations of Duan Guoxue, even the Germans used nearly thirty years to a millimeter machining accuracy of one millimeter machining.

However, Duan Guoxue's synthesis machine has been shortened by thirty years!!

The dimensional accuracy of various parts required for decomposing and combining the materials into the drawings can reach the accuracy of filling the numbers with four zeros after the decimal point. The machine tool assembled with such parts is tightly bonded with gears, which is like a tight thing like a human muscle. If you want to say it is an industrial mother machine...

The first machine tool with such high precision was made by a synthetic machine in a secret laboratory of Duan Guoxue in 131. Why did it last so long after such a thing that surpassed the times? This is because there is no suitable super technician. This thing really cannot show its proper processing accuracy.

Another point is that with such a landmaster, if there is not enough senior technicians to process it, it is better to make it later than to make it happen.

Many times, Chinese studies have lamented that there is not enough time for yourself. This is not enough time for yourself. First, it is not enough time for yourself to improve China's overall industrial production system. Another is that there is not enough time for you to educate human resources...

In China at that time, even if Duan Guoxue was given ten more synthetic machines, Duan Guoxue could not accelerate the construction of the entire China. Because all kinds of constructions require time, especially talent cultivation and scientific and technological chain construction. This Duan Guoxue could not accelerate. The technology and synthesis functions of the synthetic machine can indeed allow the Chinese people to develop rapidly in a short period of time. The cultivation of talents is without any means to accelerate the cultivation of synthetic machines. Farming is a bite-by-biting. People can grow up day by day and genius is also cultivated year by year...

This person is slow to learn one new character a day when he was in the first grade of elementary school. It is normal to learn ten characters a day. It is smart to learn one hundred characters a day. It is a genius to learn one hundred characters a day! But even if China has a large population base, how many people can learn one hundred characters a day? Moreover, so far, which province can truly popularize basic education, besides the four southwestern provinces and one Hainan?

Therefore, in the strategy of human resources training, Duan Guoxue has put human resources training in the length of 30 years. This time span is very large, but there is no way to do it. There is not enough senior talents. Even if there is a big killer, someone must know how to use it. Only after cultivating suitable talents can these scientific and technological equipment achieve the best and maximum performance.

The Germans are still unable to fully understand the technology transferred by China. It is not that the Germans are incompetent, but that some mid-to-high-end mechanical equipment cannot achieve the processing accuracy of high-precision machine tools produced by the Chinese. Even if they can have a certain amount of production, they cannot meet the batch use.

Take the production of the 11c0 horsepower diesel engine that was originally transferred for example. Although the diesel engine shell is an ordinary cast iron piece, it is easy to produce, but when the Germans got the drawings, they were dizzy by the many holes and pipes inside the cast iron piece. Some of these holes are lubricating oil pipelines, some are cooling water pipes, some are cast together during casting, and some are produced later. Although the cast iron shell is very thick, it has been empty by many holes and pipes inside. Sometimes the distance between the pipes and pipes is only one or two millimeters. If you want to achieve such a processing level, you don’t have the hard work to make hard work, you are producing large quantities of waste products.

In the processing of other parts, the processing and production of various bearings, pistons, piston rings, valves, and fuel injection valves and fuel injector nozzles is not easy. It is still a headache for Germans to achieve the design processing accuracy of these parts. Although Germans can produce such accurate parts with rigorous work style and attitude, this is the processing accuracy achieved by manpower. Without the assistance of high-precision machine tools, the production of qualified products is real.

Many parts and products can only be used in deficiencies, while others can become waste products. The consequence of this is that the engine output power is reduced, and the maintenance frequency during the use process is increased and maintenance requirements are increased.

The workers in Chinese factories not only have the same rigorous work style and high-precision machine tools to improve production efficiency and production speed. A senior technician can operate high-precision machine tools to quickly produce qualified parts and products. With the cooperation of the two, the production speed can not only be guaranteed, but also reduce the defective rate and waste rate to a very low level. This not only saves costs and losses in production, but also reduces the maintenance costs and maintenance costs during use.

If the Germans want to grind a valve with a sealing performance of zero point and two millimeters, it takes 43 processes in the factory to process and produce a process that requires a lot of processing time and measurement time. Chinese people can easily complete the sample time with just thirteen processes on high-precision processing machines. The process efficiency is higher than anyone can calculate which side has higher production efficiency. And if you also have to calculate the cost, you also have to calculate the labor cost, power consumption cost, and mechanical wear cost...

Now through spies in Germany, the United States, Britain and France have obtained some drawings of Chinese weapons exported. However, the first expression of engineers from these countries when they got the drawings was surprised, because when they saw these drawings, they were shocked by the high-precision processing requirements. They did not expect that the parts processing requirements of these weapons needed to be so high. Not to mention the engineers from the United States, Britain and France, even the Germans, who were the most awesome weapons technology at that time, felt a headache.

Well, in this machinery, the Western powers lack high-precision processing equipment. Your low-education, low-cost, and low-required 40 rockets and 1mm rockets will not be that high...

But even after getting the site, Western engineers were also scratching their heads, the processing requirements for this rocket engine were the first hurdle before them. Materials that can withstand high temperature and high pressure are not so easy to produce, which requires high demands on special metal production. Before countries can popularize the production of these special metal materials, the Chinese have already popularized mass production. If China steals the secrets in the smelting process of these materials, there is a slight similarity, because various processes and processes are really too similar, but people are obviously ahead of themselves in popularizing production. Is it because we steal the Chinese technology or the Chinese steal our technology?

The rocket launching medicine that came down again was also incredible. After disassembly and decomposing and studying the original products from China, they found that the secret of the rocket launching medicine native to China can make the rocket fly farther and more accurately lies in the fact that the rocket launching medicine is fine and even, burning evenly during the combustion process, and the output thrust is stable and constant.

But it was this dense and solid requirement that made the engineers in Western production factories frenzy. They searched for chemical factories in several countries and found that with the support of existing technology, there was only one, and two factories could meet the requirements of producing such detailed launch drugs, and it took a lot of time to make them specially. Compared with the popular products in China, everyone knows what this means...

For this reason, many Western scientists and engineers began to report lies, incredible, and difficult to understand these emotions, and in the face of a large amount of evidence, they once again responded to the mysterious China with various moods. There were incredible and difficult to understand, curious, envious, and thoughtful, and greed for themselves...

………………………………………

Facing more and more reports on China, it goes without saying that the top leaders of Britain and France have already decided to become robbers again and are ready to kill this new country again before China rises again.

Charles de Gaulle, who had just become the new French president after election, also made public remarks, expressing great anger at China's military armed operations in Indochina (Vietnam), demanding that China immediately compensate the French army for all losses here. At the same time, as an additional condition for compensation, China would ced Baise from Guangxi to France.

Regarding the speech of the French President, Chinese Vice President Li Delin only answered a question when he asked a reporter after attending the Shanghai Industrial Development Seminar: Has that guy used a castrated man's brain when he spoke?

The United States' attitude towards China began to accelerate the deterioration of war with Jiang Guangshou's continuous lobbying and speeches in the United States. Compared with the little spies installed by Britain and France in China, he, who was both from China, has many intelligence sources. Moreover, since Duan Guoxue joined the top Chinese leader and incorporated his original troops and various fields such as industry, education, and medical care, spies and spies originally installed in these departments began to play a role. Although these people could not get the core key secrets, some of the administrative policies, industrial progress, and military strength on the periphery that were not very confidential were much more detailed than those of foreign spies.

One of the biggest lobbying he had in the United States was Duan Guoxue's current policy measures. Although Duan Guoxue had publicly stated that when the war ended, he would gradually return his rights to the parliament. But as a politician, he naturally ignored this sentence automatically and instead attacked him vigorously. Under Duan Guoxue's governance, China was sinking towards a dictatorial and dark country. As a democratic Chinese, he could not see the Chinese people embarking on a path of destruction under Duan Guoxue's wrong leadership.

Jiang Guangshou also had a bombshell. After Duan Guoxue entered the Palace of China's Power, he obviously rejected the crew of the leadership body of the former Congress Party when he was appointing political personnel from the former central government and various forces.

Many positions are basically either Duan Guoxue’s own member of the Democratic Party, and a small number of them are members of the Social Democratic Party. However, members of the former Congress Party rarely enter the ruling system. Jiang Guangshou seized on this wrong nature of some of Duan Guoxue’s political thoughts and demonized Duan Guoxue’s political thoughts in the hearts of Americans...

However, in China, compared with the various parties in China, Duan Guoxue did provide great support for the position appointment of the Social Democratic Party. For the Social Democratic Party that came out of the cave at that time, Duan Guoxue highly praised his party members for their ability to enforce the law with integrity and integrity. For the already bad Congress Party members, everyone knows what kind of people are...
Chapter completed!