For many people in the visiting team, they are all the elites in political struggles, but what Duan Guoxue gave them to visit is exactly what these people don’t know or rarely understand. Among them, they clearly know that to mobilize a person or a certain group, they can use dozens and hundreds of ways to deal with each other in a targeted manner, but they rarely know. Why, as one of the countries with the most minerals in the world, China, due to the imperfect production technology and the failure to meet the requirements of popularization of processing technology, cannot currently equip such basic knowledge such as military weapons armed with tungsten steel on a large scale, because they only know how to intrigue between people, but do not use their intelligence to explore things in the unknown scientific field.

Although China's tungsten ore is indeed among the top three in the world, it is not easy to perfectly merge tungsten ore with other metals into a harder alloy. In addition, since the hardness of steel itself is extremely terrible, it increases the difficulty of processing and processing of rough parts. So far, tungsten steel has only been used in some key parts and special parts locally on some key parts and special parts, and cannot be simply processed into the most common and common daily necessities like tungsten bulbs.

After understanding this truth, no one raised this relatively ignorant question during the next visit. Because during the visit, they finally understood that the progress in science and technology requires solid mastery and improvement step by step. Just like the lathe most commonly used in industrial machining, on the surface, one of the most common tools used in machining, the equipment, which is nothing more than a bunch of bearings, gears and power output equipment. But only after visiting and understanding, these people know that the real situation is definitely not as simple as they imagined.

A seemingly simple lathe not only involves materials, but also processing technology, turning tool research, error research, machine tool stability research, fixture vibration research, etc., many other problems are a huge basic industrial system problem, and also a problem with the initial hen mother machine produced. The higher the hen's precision, the better the performance accuracy of the machine tool produced, which is easy to understand, but the problem of the hen involves an initial mechanical processing technology problem, which is very complicated! It cannot be solved overnight! This is an infinite cycle problem that can be repeated in cycles of improving the hen's ability first or improving the performance of the egg first.

But looking at the whole world, everyone chooses to cultivate people first, and then gradually improve the problems of various parts in the lathe bit by bit.

There are many problems that affect the accuracy of the lathe. From the stability of the motor of power output, it can be said that it is the source's own vibration interference. In addition, the secondary vibration and deviation caused by the joints of each bearing and gear during the power transmission process, to ensuring the shock absorption and absolute stability of the clamp is another problem. There are also some problems such as part assembly, running-in, operating environment and lubrication. This is exactly what takes a long time to improve one by one. "Don't think that the machine tool is cheap,

It only costs tens of thousands or hundreds of thousands of yuan to be moved, and those high-end tools that are used as loss are expensive, but it is normal to replace tools frequently and frequently! This alone is a lot of money, and some tools are the salary of a factory manager for a year! However, many people don’t know that some key core strength tools are actually synthesized by Duan Guoxue using a synthesizer, which is both useful and cheap. At this point, Duan Guoxue holds his baby’s synthesizer and smiles behind her, "

Many Social Democratic Party and Congress members once could not understand why the accuracy and power of the artillery and guns of Germany were much better than the arsenal controlled by the former Congress. They only realized during the visit that aside from the production of the same materials, the deep hole processing process in the future will make these people in the political struggle feel ashamed.

Under the explanation of senior workers in the factory, these people knew that deep hole processing refers to hole processing where the length-to-diameter ratio is greater than the hole diameter ratio. Ordinary deep holes can be processed with extended or long twist drills. For the four extra-deep holes, deep hole tools must be processed on special equipment and special deep hole processing machine tools. This is the main reason why the Japanese 92 infantry cannons have less than nine times the body tube. It is not that the Japanese devils are unwilling to use better cannons, but that the Japanese devils do not have much technology to ensure the production capacity of such a large number of products. The German light infantry cannon, which is unanimously favored by everyone, is only twenty-four times the caliber! Can the managers of the Congress who only know how to make money from their own pockets understand this? Those in the Social Democratic Party arsenal who wear half glasses to start production under difficult conditions even if they know these things, they can only helpless.

People from the Congress Party do not know that it is not that they did not sell it when they purchased it before. However, whether it is the United States or Germany, these deep-hole processing machinery and equipment are also lacking. Even if there are equipment that is about to be worn and eliminated, they will not be sold to China because of confidentiality. The barrel production is good, a small diameter and high-precision drill bit can be sold to you, but large-diameter ones have to drill a hole first and then use professional machine tools to process the equipment. Even the relationship between the DPP and Germany is so strong. The DPP only imported a set of equipment that is about to be eliminated from Germany in the early years for research, and then thoroughly learned the technology to produce such equipment. It can be said that the DPP itself has suffered a lot and worked hard to research these things bit by bit.

There is also a problem of personnel training. The higher the level of advanced things, the higher the level of cultural quality of workers, and the more advanced things, the more modern the operation. Look at the operators standing next to these advanced machine tools and equipment, they are all senior technical workers with at least ten years of practical work experience. Don’t think that just having rich experience can be selected to operate these high-precision processing machines. These people are basically senior talents trained by many years of systematic education from Southwest Advanced Technical School more than ten years ago. They not only have high skills in their work practice, but also have a very solid theoretical and cultural foundation.

Don’t think that having advanced processing machinery can reduce the requirements for operators, the same processing equipment. The finished products produced by primary cultural technicians are processed because of the experience and theory that are not up to standard. The average rate of 16 is between 10 and 30%, while the average rate of 4-start trumpet of these high-cultural technicians is only between 3% and 5%. Such production efficiency is enough to see the efficiency gap and cost-consuming gap between the two.

Why are German artillery more useful and far-fetched? Why do Germans prefer to use various types of artillery purchased from China? That is because in terms of materials, the artillery produced by China is much better in steel than the steel used by the world's powers, because in factories controlled by the CPP, the promotion and application of a technology called electroslag resolvation has made China ahead of the world's powers in steel smelting technology.

According to the introduction of relevant accompanying staff, this technology has so far been proposed by American.com. The steel refining application production technology has been gradually promoted to various key steel processing plants ten years ago.

Its electroslag remelting is a method of melting using the resistive heat generated by the current passing through the slag as a heat source. Its main purpose is to purify the metal and obtain a steel with uniform and dense clean tissue. The steel remelted by electroslag has high purity, low sulfur content, few non-metallic inclusions, smooth surface of the steel, clean, uniform metallographic structure and chemical composition, and the casting mechanical properties of electroslag steel can reach or exceed the index of forgings of the same steel type.

There are many types of electroslag remelting products and a wide range of applications. Their steel types include: carbon steel, alloy structural steel, bearing steel, mold steel, high steel, stainless steel, heat-resistant steel, Ge-strength steel, high temperature alloy, precision alloy, corrosion-resistant alloy, electric heat-heating alloy and other hundreds of steel types. In addition, special-shaped castings can be directly melted and cast, which can cast instead of forging, simplify production processes, and improve the utilization rate of metals.

The emergence and development of electroslag melting and casting process fundamentally resolves the main contradictions of general casting processes. It combines the advantages of electroslag resolving to obtain high metallurgical quality metals and cast cast special-shaped parts refined blanks, and has the characteristics of dense structure similar to ordinary smelting deformation metals and no anisotropy. Compared with ordinary forgings, the performance indicators of electroslag melting castings completely meet the deformation metal index of the same steel type, and even avoids some shortcomings of forgings.

It took nearly ten years from mastering and promoting this technology. The reason is not because of the hardware requirements of the technology itself. On the contrary, this technology equipment is simple, with less investment and low production costs. It is just that the disadvantage of electroslag remelting is that it has a high power consumption. During the remelting process, dust removal and dehydration devices must be installed. Not to mention, the high light power consumption cannot be easily promoted like some other processes. Using this technology in a steel mill may not be a big problem for power supply units, but what if there are ten or eight? What if there are more ten or eight on this basis? Not to mention as a joint industry, how can the electricity consumption of other processing equipment factories established around these factories be guaranteed?

Don’t think that the establishment of a power plant can be built like an ordinary factory and lifted some equipment to start electricity. The installation and debugging of traditional thermal power plants and large-scale electric shaft cores is not easy. Not to mention how much steel and conductive copper wires and human resources are consumed for the installation and traction of dense transmission networks. Let’s see how many large and medium-sized hydropower stations have been built in the southwest, especially Guangxi and Guizhou in the past ten years. These hydropower stations are not a river and a half in Pingguo village.

The micro hydropower stations created in 2008 are each large hydropower stations that can supply electricity for a small and medium-sized city. The construction of each requires a lot of manpower and material resources and time to build them. The inspection of ten cascade hydropower stations in Hongshui River alone used the manpower of the Water Conservancy Bureau and the Water Conservancy School of the then People's Party at that time spent five years on field inspections and calculation planning! Without the accumulation and precipitation of time, many problems that seem easy and simple on the surface cannot be carried out at all!

In summary, during the initial visit, these visitors finally figured it out. Although the industrial strength under the leadership of the BJP seems to be easy and simple to obtain, in fact, the hardships the BJP has truly endured on the road ahead are not that simple. This kind of advancedness is not something that can be done overnight! It requires the continuous growth of the country's comprehensive strength and overall industrial strength, and the acceleration of the renewal and research level of machines. More importantly, all kinds of inconspicuous industries work together to complement each other.

A strong country not only refers to steel output, but also includes mechanical processing capabilities, mechanical materials research, and smelting technology. This also includes the complementary relationship between the chemical industry, energy, electricity, transportation, and various industries. This is also a huge issue involving all aspects of the country's industrial capacity!

The lag in a link may be like a wooden barrel principle. How much water can a wooden barrel hold does not depend on the longest board, but on the height of the shortest board in the barrel. The lag in an industry may drag the overall lag.

The layman watches the excitement, while the experts look at the tricks. Although many things are something that these political elites cannot understand and lack understanding, this does not affect their detailed judgment and estimate of the strength controlled by the DPP. After a few days of itinerary, these people have already clearly understood why the DPP has such strong strength because the DPP has been dedicated to the development of its own industry for a long time. Many people only then understand why Duan Guoxue and the DPP were able to defeat the Japanese devils one after another and expel the land of China, and they also understand what confidence is supporting the DPP to dare to fight with the Soviet Union and win and siege the cities and plunder the land.
Chapter completed!